 HomeNewsThe reason why the fast door motor is too noisy

The reason why the fast door motor is too noisy

2023-10-16

The reason why the fast door motor is too noisy

There will always be some problems when the fast door motor is running. The fault may be that the fast door motor heats up drastically, or it may be that the fast door motor makes noise when it is operating. If the fault is that the rapid door motor makes too much noise, there are three reasons why the rapid door motor makes too much noise:
1. One is that the ball bearing is contaminated, damaged or distorted. The solution is to correct the damaged motor, or check the bearings, and add or replace grease if necessary;
2. Another reason is vibration of rotating parts. We only need to eliminate the cause of the vibration, and also check whether the fast door motor is balanced;
3. Finally, there is foreign matter in the cooling air channel. We only need to clean the channel.

There are many types of fast doors, including PVC fast doors, fast rolling shutter doors, and fast stacking doors. The function of the rapid door is to achieve the effect of protecting the dust-free air quality of the workshop through rapid isolation. The rapid door is also widely used. For example, we often use it in fields with high environmental requirements such as electronics, food, and printing.

152247107 197799452135437 4248697855394614335 N

Previous: What should you pay attention to when choosing a fast door manufacturer?

Next: What should you pay attention to when choosing a fast door manufacturer?