Before the on-site demand, after the owner requirements, clean room needs improvement?

In the fields of manufacturing electronics and food products, various innovations and new materials have emerged one after another. As a manufacturer and assembly manufacturer, how can the workshop equipment, environment, and talent technology follow the times? In particular, what are the current requirements for the production environment that require particularly high demands and how should it be satisfied?

The following three conditions may be encountered by many manufacturers:

First, because the production of electronic products or instruments is very sophisticated and needs to get a clean degree of 100,000 or other levels, many have chosen to use import and export channels such as air showers with quick shutter doors to ensure the production environment `
Second, if there is a lot of valuable items in the production workshop, there is a need for anti-theft, but the fast shutter door itself does not have the function of anti-theft;
Third, some food factories, because of the requirements of food production, need low temperature, and the temperature fluctuation of the workshop can not be too large, so the logistics channel needs to have a fast switch function, but also have a good effect of insulation.
If the above problem is a stand-alone situation, you can still use the quick shutter door to solve the problem. However, if you need the above conditions at the same time, it is obvious that the quick shutter door cannot be qualified. At this time, we need to consider other more advanced technologies. product.
To do the above analysis, you need to meet: 1, can be linked with the air shower and other filtration equipment; 2, insulation effect should be very good airtight; 3, the need for anti-theft properties; 4, must be able to meet the frequent rapid opening and closing.
At this time, the turbine hard door with insulation and anti-theft, fast opening, is very suitable for this kind of demand. The door of the turbine hard door is a double aluminum plate clamp polyurethane, has a very good insulation and anti-theft function, hard door There are rubber seals on both sides of the door frame, and the panel door is also made of other transparent or wood grain and other styles, which greatly improves the visual appearance of the site. The aluminum alloy turbine guide load-bearing track of this door is a patented technology of the company to ensure the high speed operation of the curtain in the opening and closing process. The rolling friction between the curtain and the track enables effective noise control. According to the on-site installation structure, it can be divided into: turbine suction type, elliptical suction type , Straight-lifting, 90-degree standard curve-raising or more track ways, balancing springs on both sides of the door post, and the weight of the door plate to maintain a certain balance, while reducing the load when the motor is running, running smoothly and freely. Wind resistance up to 32m/s (International wind rating 12).
It can be seen that the turbo hard door is an evolutionary version of the next generation of quick shutter doors. At the same time, it is also the preferred choice for the next generation of products.