High Speed Door Airbag Sensor Test

High Speed Door Airbag Sensor Test

Connect the airbag test, first turn off the emergency stop button, the power box power is turned on, the airbag receiving panel learning button is pressed once, and the signal receiver light is on.

Open the electric control box and stop the emergency. Press the pressure hose inside the airbag pocket, and the door body will receive the signal to rise automatically and operate normally.

When the electric control box cannot receive the airbag signal:

1. Check whether the battery in the airbag transmitter is exhausted (the side of the curtain weight plate is installed) to replace the battery;

2. Check whether the pressure hose is damaged, leaking or sealing the opening.